The Fanvil WF20 is an enterprise-grade USB Wi-Fi dongle engineered to bring high-speed, cable-free wireless connectivity to Fanvil IP desktop phones. Designed for modern offices, temporary workstations, historic buildings, and retail environments where pulling physical Ethernet cables to the desk is either impractical or cost-prohibitive, the WF20 transforms a standard wired VoIP phone into a flexible wireless desktop endpoint. By utilizing the phone’s integrated USB Type-A port, it allows organizations to deploy phones anywhere within reach of an enterprise wireless network without altering desk furniture or installing new structured cabling.
Featuring dual-band capability operating across both 2.4 GHz (up to 150 Mbps) and 5 GHz (up to 433 Mbps) frequencies, the WF20 delivers a combined transmission rate of up to 600 Mbps. The 5 GHz band bypasses congested 2.4 GHz office airwaves, minimizing packet jitter and latency to ensure crystal-clear HD voice quality on high-priority VoIP calls. Built with an internal omnidirectional antenna in an ultra-compact nano form factor, it plugs flush into the rear or side USB port of compatible Fanvil IP phones (including X5U, X6U, X7, X7C, X210, X210i, and select V-series models). The dongle operates with seamless plug-and-play simplicity—requiring zero external driver installations or firmware patches—and fully supports advanced wireless security protocols including WPA/WPA2-PSK and enterprise-grade 802.1x EAP authentication to safeguard corporate voice communications.
Technical Specifications
Device Type: Dual-Band USB Wi-Fi Adapter / Dongle
Host Interface: USB 2.0 Type-A
Wireless Standards: IEEE 802.11a/b/g/n/ac
Frequency Bands: Dual-Band 2.4 GHz and 5.0 GHz
Transmission Rates:
2.4 GHz: Up to 150 Mbps (802.11n)
5.0 GHz: Up to 433 Mbps (802.11ac)
Total Theoretical Bandwidth: Up to 583 / 600 Mbps
Antenna Type: Integrated High-Efficiency Omnidirectional Antenna
Wireless Security & Encryption: WEP (64/128-bit), WPA-PSK, WPA2-PSK, WPA/WPA2-Enterprise (802.1x EAP), TKIP, AES
Network Modes: Infrastructure mode (connects directly to enterprise wireless access points and routers)
Form Factor: Ultra-compact Nano USB form factor
Plug-and-Play Compatibility: Supported out of the box on Fanvil IP phones with USB host support (e.g., X5U, X6U, X7, X7C, X210, X210i, V64, V65, and compatible models)
Power Supply: 5V DC via USB Bus (low power consumption, powered directly by the host phone)
Power Consumption: Receive: ~60 mA; Transmit: ~150 mA
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Operating Humidity: 10% to 90% Non-condensing
Dimensions: 38 × 18 × 8 mm (1.50 × 0.71 × 0.31 in)
Weight: ~5 g (0.18 oz)
Key Features
Dual-Band 2.4 GHz & 5 GHz Flexibility: Delivers up to 433 Mbps on the less congested 5 GHz band for low-latency VoIP voice, alongside 150 Mbps on 2.4 GHz for broad signal penetration.
Instant Plug-and-Play Setup: Automatically recognized by compatible Fanvil IP phones—plug it into the USB port and configure Wi-Fi directly via the phone’s on-screen menu.
Compact Nano Enclosure: Slim, low-profile design sits nearly flush against the phone’s casing, preventing snagging, port strain, or physical damage.
Enterprise-Grade Wireless Security: Protects business calls and credentials using WPA/WPA2-PSK and 802.1x enterprise encryption.
Built-in Omnidirectional Antenna: Provides reliable, multi-angle wireless reception without requiring external folding antennas.
USB Bus Powered: Draws minimal power directly from the IP phone’s USB port, eliminating external power bricks or specialized power supplies.
Cost-Saving Wireless Migration: Converts existing wired Fanvil phones into wireless endpoints without purchasing new, dedicated Wi-Fi desk phones.
What’s in the Box (Unboxing)
Fanvil WF20 USB Wi-Fi Dongle
Quick Installation Guide & Regulatory Information Sheet
Main Benefits
Eliminates Costly Cabling Drops: Saves substantial installation time and contractor expenses by removing the need to pull structured Cat5e/Cat6 drops to individual desks.
Unlocks Flexible Office Layouts: Allows businesses to quickly reposition workstations, customer desks, or reception setups without worrying about Ethernet jack locations.
Reliable HD Voice Over Wi-Fi: 802.11ac 5 GHz connectivity delivers the clean bandwidth and low packet loss needed for uninterrupted, wideband VoIP calls.
Effortless IT Provisioning: Configuration takes seconds directly from the phone’s LCD display or web GUI, streamlining multi-unit deployments.
Who It Is For
Corporate Offices & Co-Working Spaces: Ideal for dynamic office setups and shared hot-desks where physical LAN cabling is limited or workstations shift frequently.
Heritage Buildings & Retail Outlets: Perfect for historic sites, leased retail shops, or boutique hotel reception desks where cutting or drilling walls for Ethernet is prohibited.
Temporary Workstations & Event Sites: Great for rapidly establishing temporary communication hubs, pop-up branches, or project site offices using existing Wi-Fi coverage.







Reviews
There are no reviews yet.