The Ubiquiti UACC-OM-SM-1G-S-2 is a matched 2-pack of 1 Gbps Bidirectional (BiDi) Single-Mode SFP Optical Transceivers engineered to deliver reliable, full-duplex Gigabit Ethernet connectivity over a single strand of fiber-optic cable. By leveraging Wavelength Division Multiplexing (WDM) technology, this complementary module pair transmits and receives data simultaneously across different optical wavelengths (1310 nm and 1550 nm), effectively doubling the usable data capacity of existing single-mode fiber infrastructure without requiring additional cable runs.
Supplied as a factory-paired set—one module operating at TX 1310 nm / RX 1550 nm and the companion module operating at TX 1550 nm / RX 1310 nm—the UACC-OM-SM-1G-S-2 establishes a link over distances up to 3 kilometers (1.9 miles) using standard 9/125 µm OS1/OS2 single-mode fiber terminated with Simplex LC UPC connectors. Each hot-swappable module is built into a shielded, heat-dissipating metallic housing with an ultra-low power consumption of just 0.66W. Designed for plug-and-play integration with Ubiquiti UniFi switches, EdgeSwitch, and third-party networking devices adhering to SFP Multi-Source Agreement (MSA) standards, it provides an efficient fiber interconnect for inter-building backbones, remote surveillance uplinks, and enterprise campus networks.
Technical Specifications
Form Factor: SFP (Small Form-Factor Pluggable)
Pack Quantity: 2 Modules (Matched Pair: 1× Blue Latch / 1× Yellow Latch)
Connector Type: Simplex LC UPC
Supported Media: Single-Mode Fiber (SMF, 9/125 µm, OS1/OS2)
Data Transfer Rate: 1.25 Gbps (1 Gbps Gigabit Ethernet)
BiDi Support (WDM): Yes (Simultaneous TX and RX over a single fiber core)
Operating Wavelengths:
Module A: TX 1310 nm / RX 1550 nm
Module B: TX 1550 nm / RX 1310 nm
Maximum Transmission Distance: Up to 3 km (1.9 miles)
Transmitter Type: Fabry-Perot (FP) / Distributed Feedback (DFB) Laser
Receiver Type: PIN Photodetector
Power Consumption: Max 0.66 W per module
Hot-Swappable: Yes
Digital Diagnostic Monitoring (DDM): Supported
Laser Safety: Class 1 Laser Product (IEC/EN 60825-1:2014)
Hardware Compatibility: Ubiquiti UniFi switches, EdgeSwitches, gateways, and MSA-compliant SFP cages
Operating Temperature: 0°C to 70°C (32°F to 158°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Dimensions: 56.6 × 13.7 × 12.8 mm (2.23 × 0.54 × 0.50 in)
Weight: ~20 g per module
Key Features
BiDi Single-Strand Architecture: Transmits and receives data over a single strand of single-mode fiber, halving fiber strand requirements compared to traditional dual-fiber transceivers.
Matched Interconnect Pair: Includes both complementary A-side (1310TX/1550RX) and B-side (1550TX/1310RX) modules ready for point-to-point deployment straight out of the box.
3-Kilometer Range: Reaches up to 3 km (1.9 miles), providing long-range reach for campus networks, remote substations, and multi-building facilities.
Energy-Efficient Operation: Low 0.66W power envelope reduces thermal buildup inside high-density switch SFP cages.
Simplex LC Termination: Standard Simplex LC UPC port ensures direct compatibility with single-strand single-mode patch cables.
Color-Coded Bail Latches: Clearly differentiated bail latches allow easy identification of TX/RX wavelengths during installation and maintenance.
Broad Ecosystem Interoperability: Operates natively in UniFi OS consoles and switches with real-time DDM optical link health monitoring.
What’s in the Box (Unboxing)
1× Ubiquiti 1G BiDi SFP Module (TX 1310 nm / RX 1550 nm)
1× Ubiquiti 1G BiDi SFP Module (TX 1550 nm / RX 1310 nm)
Protective Rubber Dust Caps
Quick Start Information Card
Main Benefits
Double Existing Fiber Capacity: Allows networks with single-fiber constraints to establish full-duplex Gigabit links without trenching new fiber-optic lines.
Turnkey Paired Convenience: Eliminates the guesswork of sourcing complementary TX/RX wavelength modules separately.
Immunity to Electrical Noise: Single-mode optical fiber offers total isolation against lightning, ground loop differentials, and electromagnetic interference between buildings.
Seamless Hot-Plugging: Deploy, test, and swap modules on active switches without causing system restarts or network disruptions.
Who It Is For
Campus & Multi-Building Facilities: Ideal for linking separate administrative buildings, warehouses, and guardhouses over existing single-strand fiber runs.
IP Surveillance & CCTV Installers: Perfect for backhauling high-definition camera aggregation switches from perimeter poles back to core NVR server racks.
ISPs & Enterprise Network Engineers: Great for provisioning point-to-point Gigabit subscriber links or inter-switch uplinks where available dark fiber cores are limited.












Reviews
There are no reviews yet.