The Giganet GN-C6A-UTP-01M-GR-26 is a premium, factory-molded Category 6A unshielded (U/UTP) patch cord engineered to deliver reliable 10 Gigabit Ethernet (10GBASE-T) connectivity in high-density enterprise data centers, server racks, network distribution frames, and commercial office work areas. Measuring 1 meter (approx. 3.3 feet) in length, this patch lead is optimized for short-reach cross-connect patching between patch panels and network switches, eliminating excess cable slack to maximize airflow and maintain clean cable management within 19-inch equipment racks.
Manufactured with 26 AWG multi-stranded 100% bare copper conductors, the patch cord combines electrical performance with high flexibility, allowing tight bend radii without signal degradation or packet loss. It is tested and verified to deliver bandwidth frequencies up to 500 MHz, exceeding ANSI/TIA-568.2-D, ISO/IEC 11801 Class EA, and EN 50173 standards. Each end is terminated with precision-molded RJ45 plugs equipped with 50-microinch gold-plated contact pins that resist corrosion, oxidation, and spark damage under Power over Ethernet (PoE) loads. The integral slimline snagless strain-relief boot protects the RJ45 locking latch from snapping during moves, adds, and changes (MACs) while allowing high-density side-by-side plugging on 24-port and 48-port switch blades. Encased in a Low Smoke Zero Halogen (LSZH/LSOH) flame-retardant grey jacket, it releases virtually no toxic halogens or dense black smoke during combustion, ensuring full compliance with stringent commercial building life-safety codes.
Technical Specifications
Brand / Manufacturer: Giganet
Product Part Number: GN-C6A-UTP-01M-GR-26
Cable Category: Category 6A (Cat.6A / Class EA)
Shielding Type: U/UTP (Unshielded Twisted Pair)
Length: 1.0 Meter (Approx. 3.28 ft)
Conductor Gauge: 26 AWG Stranded Bare Annealed Copper
Conductor Construction: 7/0.16 mm multi-strand copper cores for enhanced mechanical flex-life
Core Pair Count: 4 Twisted Pairs (Color-coded: Blue/White-Blue, Orange/White-Orange, Green/White-Green, Brown/White-Brown)
Connector Type: Factory-molded RJ45 8P8C Modular Plugs (Male to Male)
Contact Plating: 50-microinch (1.27 µm) Pure Gold over Nickel Underplate
Boot Style: Slimline Snagless Strain-Relief Molded Boot (prevents tab breakage and simplifies unlatching)
Outer Jacket Material: Low Smoke Zero Halogen (LSZH / LSOH) Flame-Retardant Compound
Jacket Color: Grey (GR)
Bandwidth Performance: Tested and verified up to 500 MHz
Transmission Speed: 10/100/1000 Mbps Gigabit and 10 Gbps (10GBASE-T)
Wiring Standard: TIA/EIA-568-B straight-through pinout
Power over Ethernet (PoE) Support: IEEE 802.3af (PoE), IEEE 802.3at (PoE+), IEEE 802.3bt (PoE++ / 4PPoE Type 3 & Type 4 up to 90W)
Mating Durability: Minimum 750 insertion/withdrawal cycles
Flame & Safety Compliance: IEC 60332-1-2 (Flame propagation), IEC 61034-1/2 (Low smoke emission), IEC 60754-1/2 (Halogen-free zero acid gas), RoHS & REACH compliant
Operating Temperature: -20°C to +60°C (-4°F to 140°F)
Installation Temperature: 0°C to +50°C (32°F to 122°F)
Packaging: Individual sealed anti-static polybag
Key Features
Certified 10GBASE-T Throughput: Verified for 10 Gigabit high-speed data transmission at bandwidth frequencies up to 500 MHz.
Flexible 26 AWG Stranded Copper: Multi-stranded copper conductors allow smooth routing and tight bends inside densely packed rack organizers without conductor fatigue.
50µ” Gold-Plated Contacts: High-specification gold plating ensures maximum signal conductivity, corrosion resistance, and arc-protection during PoE disconnects.
Slimline Snagless Molded Boots: Protects RJ45 retention tabs from snagging and snapping while fitting effortlessly into high-density 48-port switch environments.
Low Smoke Zero Halogen (LSZH) Jacket: Safe for enterprise installations, emitting non-toxic, clear smoke in the event of a fire to protect personnel and sensitive electronic gear.
Factory Fluke Component Tested: 100% factory terminated and tested to pass Cat6A patch cord standards, eliminating on-site crimping failures.
High-Power PoE++ Ready: Safely supports IEEE 802.3bt Type 3 and Type 4 PoE up to 90W for Wi-Fi 6/7 access points, VoIP phones, and smart building sensors.
What’s in the Box (Unboxing)
Giganet GN-C6A-UTP-01M-GR-26 Category 6A 1M Grey UTP Patch Cord
Individual Protective Polybag Packaging with Factory Barcode and Specification Label
Main Benefits
Optimized Rack Cable Management: 1-meter length provides clean, direct interconnections between adjacent patch panels and switches without unsightly cable loops.
Maximum Life Safety Compliance: LSZH jacket formulation meets stringent fire safety requirements in corporate offices, data centers, airports, and hospitals.
Consistent 10G Channel Reliability: Factory termination ensures consistent impedance matching, low return loss, and near-zero crosstalk.
Durability Over Repeated Patching: Robust molded boots and 50µ” contacts withstand frequent patch schedule reconfigurations without port damage.
Who It Is For
Data Center & Server Room Engineers: Ideal for rack cabling, switch-to-patch-panel interconnects, and server-to-TOR (Top-of-Rack) switch connections.
Enterprise Structured Cabling Installers: Perfect for deploying certified 10 Gbps Category 6A channel links in commercial office buildings and campus facilities.
IT Support & Systems Administrators: Great for workstation desk connections, VoIP phone patching, and reliable lab testing setups.





Reviews
There are no reviews yet.