The Ubiquiti UACC-OM-MM-10G-D-2 (formerly UF-MM-10G) is a factory-matched 2-pack of 10 Gbps Multi-Mode SFP+ Optical Transceiver Modules designed for high-speed, short-reach data center interconnections, server links, and enterprise aggregation uplinks. Operating at an 850 nm optical wavelength over 50/125 µm multi-mode fiber (MMF), this module pair delivers full-duplex 10 Gigabit Ethernet connectivity up to 300 meters on OM3 fiber and up to 400 meters on OM4 fiber.
Engineered with standard Duplex LC UPC optical interfaces, the UACC-OM-MM-10G-D-2 provides wire-speed 10.3 Gbps throughput with ultra-low latency and minimal power consumption (under 0.8W per module). Each hot-swappable module incorporates Digital Diagnostic Monitoring (DDM), enabling real-time monitoring of operating temperature, supply voltage, laser bias current, and optical transmit/receive power directly inside the UniFi Network dashboard. Encased in an all-metal, anti-EMI protective housing with an ergonomic quick-release bail latch, these transceivers deliver robust, cost-effective short-range fiber connectivity for UniFi switches, Dream Machines, hypervisors, and enterprise NAS storage systems.
Technical Specifications
Form Factor: SFP+ (Enhanced Small Form-Factor Pluggable)
Pack Quantity: 2 Modules (Identical 10G Multi-Mode Transceivers)
Connector Type: Duplex LC UPC
Supported Media: Multi-Mode Fiber (MMF, 50/125 µm, OM3/OM4/OM5)
Data Transfer Rate: 10.3 Gbps (10 Gigabit Ethernet)
Operating Wavelength: 850 nm
Maximum Transmission Distance:
OM3 Fiber: Up to 300 m (984 ft)
OM4 Fiber: Up to 400 m (1,312 ft)
OM2 Fiber: Up to 82 m (269 ft)
OM1 Fiber (62.5/125 µm): Up to 33 m (108 ft)
Transmitter Type: 850 nm VCSEL Laser (Class 1 Laser Product)
Receiver Type: PIN Photodetector
Optical Budget: 5.1 dB Min.
TX Power Range: -7.3 to -1 dBm
RX Sensitivity: -11.1 dBm
Power Consumption: Max 0.8 W per module
Hot-Swappable: Yes
Digital Diagnostic Monitoring (DDM): Supported
Compliance: SFP+ MSA, IEEE 802.3ae 10GBASE-SR, RoHS, CE, FCC
Hardware Compatibility: Ubiquiti UniFi switches, UniFi Gateways (UDM-Pro, UDM-SE, UDM-Pro-Max), EdgeSwitch, EdgeRouter, and standard MSA SFP+ cages
Operating Temperature: 0°C to 70°C (32°F to 158°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Dimensions: 56.6 × 13.7 × 12.8 mm (2.23 × 0.54 × 0.50 in)
Weight: 20 g (0.7 oz) per module
Key Features
10 Gbps High-Speed Throughput: Delivers line-rate 10GBASE-SR optical transmission to eliminate local network bottlenecks across core switch stacks and server clusters.
Up to 300m/400m Reach: Provides ideal short-reach coverage for within-building risers, server rooms, and rack-to-rack structured fiber runs using OM3/OM4 cabling.
Duplex LC Optical Interface: Industry-standard Duplex LC UPC termination ensures universal compatibility with widespread multi-mode patch cables and fiber enclosures.
Real-Time DDM Telemetry: Built-in Digital Diagnostic Monitoring provides instant visibility into optical signal levels, operating temperature, and voltage via UniFi Network.
Energy-Efficient Low-Heat Design: Consumes under 0.8W per module, keeping high-density SFP+ aggregation switches running cool and reliable.
Anti-EMI Metal Housing: Full metallic construction suppresses electromagnetic interference and ensures dependable grounding.
Hot-Pluggable Ease: Insert, remove, or swap modules on active networking equipment without disrupting live switch operations or rebooting hardware.
What’s in the Box (Unboxing)
2× Ubiquiti 10 Gbps Multi-Mode SFP+ Optical Transceivers (850 nm, 10GBASE-SR)
Protective Rubber Dust Caps (Pre-installed)
Quick Start Information Card
Main Benefits
Cost-Effective 10G Backbone: Delivers high-bandwidth 10 Gigabit performance at a significantly lower cost than single-mode long-range optics.
Complete Point-to-Point Set: Pre-packaged in a 2-pack to immediately link two SFP+ ports on switches, routers, or servers.
Immunity to RF and Electrical Interference: Optical transmission completely isolates connections from ground noise, static spikes, and heavy industrial machinery interference.
Plug-and-Play UniFi Compatibility: Automatically detected and recognized across UniFi OS gateways, Pro/Enterprise switches, and network aggregation appliances.
Who It Is For
Enterprise Server Rooms & Data Closets: Ideal for top-of-rack switch interconnections and uplink trunks between distribution switches in the same facility.
High-Speed Network Storage (SAN/NAS): Perfect for establishing direct 10G optical links to storage appliances and virtualization hypervisors.
Commercial Buildings & In-Building Risers: Great for linking floor-by-floor network switches over multi-mode OM3/OM4 riser fiber runs.












Reviews
There are no reviews yet.