Netlink Fiber Optic Media Converter HTB-1100S-25KM
Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users
Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
UTP: RJ-45 10/100Mbps;
Fiber: ST/SC/FC 100Mbps
UTP: Cat. 5 UTP (the max distance up to 100m)
Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 ℃ ～ 70 ℃
Humidity: 5% ～ 90%
Internal power: 30x110x140mm
External power: 26x70x93mm
HTB -1100S is 10/100M adaptive fast Ethernet opticaltransceiver. It can achieve two different twisted-pair cable and optical fiber transmission medium of transformation, relay base – TX 10/100 and 100 base – FX two different network segments, can satisfy the long distance, high speed and high bandwidth fast Ethernet workgroup user needs.
Follow the IEEE 802.3, IEEE 802.3u and 100Base-FX standards
10/100Mbps data transfer rate
Support full-duplex and half-duplex way of working
Provides a standard RJ45 interface and SC fiber interface